Cabinet Service
Cabinet Painting in Utah County, UT
A factory-smooth kitchen finish without tearing the kitchen out. Doors and drawer fronts sprayed in our finishing shop, boxes sprayed on site in a dust-controlled zone.
What's included
The look of new cabinets, on a fraction of the budget — and the timeline.
Doors finished in a controlled temporary spray booth built onsite
We build a sealed, ventilated spray booth on site, then label and hinge-map every door and drawer front so it returns to the exact same spot. No off-site transport, no mix-ups.
HVLP-sprayed urethane enamel
Sherwin-Williams Emerald Urethane Trim Enamel through an HVLP system. The finish levels glass-smooth, cures hard, and reads as factory work — not brushed cabinets.
Grain filled before primer
Open-pore woods like oak get a wipe-on grain filler before the bonding primer. No telegraphed grain pattern under the topcoat.
Boxes sprayed on site, dust controlled
We mask off the kitchen with plastic walls and ZipPoles, run a HEPA air scrubber, and spray the boxes in place. Your countertops, appliances, and floors stay clean.
Hardware re-hung straight
We re-drill for new pulls if you're upgrading, or reuse the original holes and re-hang every hinge plumb. Doors close flush, not crooked.
Color and sheen guidance
Sample doors and drawdowns at the consultation. We talk about your light, your counters, your hardware — and steer you to a color that still looks right in three years.
The prep is the product
A glass-smooth cabinet finish is 80% what you do before the topcoat.
A sprayed finish broadcasts every flaw underneath. The work is in the prep, not the spray pass.
- Degrease every door, drawer, and box face with TSP substitute; rinse and dry.
- Scuff-sand all surfaces with 220-grit; vacuum and tack-cloth before primer.
- Wipe-on grain filler on open-pore woods (oak, ash); sand flat once cured.
- Bonding primer (Sherwin-Williams Extreme Bond or BIN) over every surface, sanded between coats.
- Two coats of Emerald Urethane Trim Enamel through HVLP at manufacturer-spec mil thickness.
The Canvas Process
A buttoned-up process from first call to final walk-through.
- 1
You reach out
We call within 5 minutes to learn about your project and schedule your free Paint Design Consultation.
- 2
On-site consultation
Your Paint Design Consultant meets you at home, walks the property, listens to what matters to you, and builds a clear written scope on the spot.
- 3
Pre-job walk-through
Once you're on the schedule, your Project Success Manager walks the job with you before day one — so every detail is locked and nothing surprises you.
- 4
The work
Our crew works 8am–6pm, cleans up daily, and keeps you in the loop. When we're done, we walk every inch with you. You approve before we close the job.
- 5
Annual touch-up
Annually, we reach back out for your free touch-up visit. We don't disappear after the check clears.
Recent work
Real homes. Real finishes.
Photos shown are of Canvas Drywall's finished Drywall Product.
The Canvas Care Package
Four Guarantees That Make Hiring Us a Sure Bet
The Canvas Care Package — backed in writing, on every job.
On-Time Guarantee
We start when we say we'll start, and finish when we say we'll finish.
Leave It Better Than We Found It
Daily clean-up, dust control, and a final walk-through you sign off on.
Property Protection
Floors covered, furniture moved and wrapped, landscaping respected.
Expert Craftsmanship — 3 Years
Three-year written warranty on our workmanship. In writing, every job.
Questions
Good answers, not sales pitches.
How long is the kitchen out of commission?+
Doors and drawer fronts are finished in a controlled temporary spray booth we build on site over 7–10 days. Boxes are sanded, primed, and sprayed in place over 3–4 days. You can use the kitchen most evenings; we mask off the work zone and clean up at the end of each day.
What finish do you use on cabinets?+
Sherwin-Williams Emerald Urethane Trim Enamel sprayed through an HVLP system. It levels glass-smooth, cures hard, and stands up to fingernails and cleaning. Sheen is your call — we usually steer satin for a softer look, semi-gloss for high-traffic family kitchens.
Will the grain show through?+
On oak it can if you don't fill it. We grain-fill open-pore woods before primer so the finish reads as smooth painted millwork, not painted oak.
Can you help with color and sheen?+
Yes. Your Paint Design Consultant brings sample doors and sheen drawdowns to the consultation. We talk about your countertops, hardware, flooring, and the light the kitchen actually gets at the times you use it most.
Other services
- Interior Painting — Fresh color, clean lines, protected floors. Walls, ceilings, trim, and doors done right.
- Exterior Painting — Utah's weather is hard on paint. We prep the surface so the finish lasts.
- Commercial Painting — Offices, HOAs, and tenant improvements. Scheduled around your business, not ours.
- New Construction Painting — Paint programs built for custom builders and new-home owners. On time and on schedule.
Transform the kitchen, skip the remodel.
Book your free Paint Design Consultation. We bring sample doors, sheen drawdowns, and a written scope — and we'll show you the finish before you commit.
Old-fashioned craftsmanship. Modern process.